It is important to understand that TV is not only a screen. A huge number of different devices are connected to the TV device: speakers, subwoofer, laptop, receiver, etc. Add to this the power cord and antenna cable. It is not surprising that all users have a question: how to hide the wires from the TV on the wall, in the floor, or decorate them?
Now let's look at 5 main ways to disguise all cords. Let's determine where it is better to hide the wires. Let us give real examples with photographs that confirm that it is indeed possible to hide all communications.
into the wall
Hiding the cables is not difficult. Especially considering the fact that masking various communications is a real trend in the world of interior design. Very often you have to run the antenna cable across the entire apartment. This violates the aesthetic picture. Therefore, new ideas on how to hide wires from the TV will be more useful than ever.
Remember that the antenna cable is not the only wire that connects to the TV device. Keep in mind that you also need to disguise the power cord. Many owners of modern equipment connect an Ethernet cable to a LAN connector. Add to this an HDMI cable, which is used to connect additional devices.
To solve this problem, use floor skirting boards with cable channels. They allow you to hide the wires. What to do if the TV is hanging on the wall? You will have to pull the cables out of the baseboard to connect them to the TV. It is clear that such a solution can hardly be called optimal. Therefore, it is wiser to hide communications in the wall.
What is the easiest way out of this situation? Twist the wires into a bundle using nylon ties. Try to disguise the cords somehow. This method absolutely cannot be called ideal, but it has the right to life.
A fundamental, but very labor-intensive solution is laying wires in grooves. Special holes need to be made during repairs. Don't forget to install a TV outlet on the wall. This is the most accurate and technologically advanced way. None of the guests will accidentally touch the wires. Also, the cords will be kept out of reach of pets. All wires are output to a single console, which contains the necessary connectors.
To route wires along grooves, it is absolutely not necessary to chisel the entire wall. Stretch them all the way to the baseboard, and then hide them in it. The main disadvantage of this method is that it is suitable only for those owners of TV equipment who are renovating their house or apartment.
How to hide wires in the wall under the TV if you have just recently finished finishing? The optimal solution is to decorate the cords, but we’ll talk about that a little later. Now let’s analyze how to hide communications for a TV on the wall.
First, think carefully about where exactly the TV will be located. Mark the location of the device on the wall. The second stage is the choice of bracket. This aspect is of enormous importance. Despite the global VESA standard, which includes the most popular mounting points, the brackets themselves come in different shapes and sizes.
Think carefully about the best type of bracket to choose. If the mount is too massive, it will interfere with commutation. An incorrectly selected bracket size will cause wires to fall out from behind the TV screen.
To make accurate measurements, you must first buy a TV. When the device is at your home, measure the dimensions, and then buy a special bracket. Try on the TV mount, measure the distance that remains to the edges - at this distance you need to make sockets.
The measurements taken need to be transferred to the wall, and then you can start working. Using a grinder, cut 2 vertical strips in the wall. Their depth should be literally a few centimeters. The distance between the stripes is no more than three centimeters.
Using a hammer drill, the inner part is hollowed out. This allows you to form full-fledged grooves. Make several holes using diamond bits. Sockets will be placed in them. All necessary outputs should be located here: power supply, antenna cable. Consider how many power points you will need. This depends on the number of equipment connected to the TV.
This completes the most difficult work. Place all the cords in the grooves made. All wires are first secured with plastic staples. If this is not done, then they will constantly fall out, interfering with subsequent wall finishing.
The ends of the wires must be connected according to the appropriate diagram with the socket. Then it needs to be installed in a specially designated place. The grooves should be sealed with gypsum plaster. The last stage is finishing. Install the bracket and fix the TV on it. Connect all wires to the TV.
Hiding wires from TV and computer
Usually the TV is placed in plain sight, so the long cable from the equipment will also be visible to everyone. Most often, during repairs, they immediately determine a place for the TV, installing sockets behind it, and leading the wire out of the wall. It is recommended to carefully peel off the wallpaper, make a groove for the wiring, place it in the hole, drowning it in the corrugation. The wires are fastened using brackets.
Related article: How to make an imitation brick wall with your own hands
There are almost always a lot of cables near the computer desk, because printers, modems, routers and other devices are connected to the system unit. To hide the “tangle”, you can do the following:
- attach the wires to the inner surface of the table with self-tapping screws, reliable tape, and staples;
- beautifully decorate a shoe box, a plastic box, cut holes and release wiring;
- sew a fabric cover, attach it to the table top or to the back of the furniture from the inside;
- connect the cables with office clips to the furniture;
- hide the wiring in a single “hose” that will prevent confusion.
To the floor
The second way is to hide the cords under the floor. Today in construction stores you can easily buy special skirting boards equipped with a niche for masking the cable. You just need to remove the outer panel, and then remove the wires into this space. Then install the panel back.
The main advantage of this option is efficiency, cleanliness, and simplicity. Work takes up minimal free time. To cover the cords under the baseboard, you don't have to hammer anything. No dirt, etc. Antenna and Internet cables can be placed under the baseboard. With their help, other communications are also masked.
The antenna cable of the TV can also be hidden on the floor, or rather under it. How can I do that? Take a hammer drill, and then make holes in the floor, which will actually be intended for the wires. Use corrugation to create a protective layer, and then you can lay the cords.
When installation is complete, level the floor using a mixture of sand and cement. If the apartment has a wooden floor, then you will need to dismantle the boards and place the wires in a metal tube.
Unusual options for decorating wires
In order to hide wiring from view, it is not necessary to break walls and ceilings, buy panels or decorative boxes.
If you use your imagination, the cords can be beautifully placed on the wall.
For example, here are a few original solutions.
How to decorate on the wall from an antenna or tuner
If you approach camouflage creatively, wires can become an unusual decorative element. They are able to enliven the atmosphere or interior as a whole. To do this, it is enough to purchase special clamps, which are made in various forms. For example, construct something like a tree branch from a cord using leaf-shaped clips.
Related article: Restoration of brickwork of external walls
If the wall is bare and the wire is long enough, then make a drawing on the wall. Draw a car, a cityscape, a road or a fence. Special stickers for the wall will dilute the design and give it completeness.
How to close on the wall
You can cover the wiring using various decorative elements for the wall: photo wallpaper, paintings. A bookshelf with a cord behind it will look original and beautiful. Using design techniques it is possible to decorate a wall in an original way:
- The loft style will be complemented by cable channels, which are designed in the form of bricks.
- The classic interior involves wood finishing. Panels and additional elements made of wood will not be superfluous.
- In a high-tech room, wires in the form of pipes secured with nails or screws would look appropriate.
How to hide a junction box on the wall
Since there must be free access to the junction box, it cannot be completely closed. But there are original solutions that will make it a decorative element:
- hang a decorative plate, poster or small picture on the lid;
- replace the standard box with a decorative one, which can be bought at any electrical store;
- decorate the cover with stickers designed to decorate sockets and switches.
How to hide wires on the wall beautifully from hanging light bulbs
Spot lighting in apartments is now popular, but hanging light bulbs have long cords that spoil the appearance of the room.
They are masked using special panels, which are sold in any hardware stores. They come in different colors and shapes, so it's easy to choose the right style.
If the wire is long, then using special fasteners, they create original patterns on the ceiling or wall. Decorated with additional accessories and stickers.
When does it make sense to groove cells on a wall or ceiling?
Grilling a wall or ceiling will be needed in the following cases:
- To lay long cords and cables stretching across the entire apartment, which are not possible to beat.
- If there are too many electrical devices in the apartment.
- For security. Children and pets can reach cords, even those hidden behind panels and stickers.
- Categorical denial of the presence of wiring elements in the interior.
A modern apartment consists of many communications, where electrical wiring occupies one of the first places. It connects not only light sources, but also all equipment and digital devices.
The abundance of cords creates a not very pleasant appearance, and if there are children in the apartment, then it also poses a danger. To avoid troubles, when planning a repair, you should think about how to hide the wires. In addition to internal camouflage, external camouflage is often used. The modern market offers a wide selection of various elements and accessories for these purposes.
In cable channel
A special box also allows you to hide the wires. However, this is a less aesthetic option. The user can make a cable channel independently or buy a ready-made one in a store. Hiding wiring in a box is much easier and faster than making special holes in the floor.
Having carefully studied the assortment of special stores, we come to the conclusion that users are offered several types of cable channels. The simplest option is PVC boxes. Absolutely everyone saw them. This is an ordinary cable channel made of plastic. Most often they are found white. The removable cover is held in place by latches.
Is it possible to fit a PVC box harmoniously into the interior? This is possible, but only on condition that the color of the cable channel matches the palette of the room's interior. It is important that it does not blend into the interior, but at the same time does not look too catchy.
Perhaps the rarest option is models made from MDF. Such boxes will harmoniously fit into a classic interior, which contains wooden furniture and various interior items.
Metal cable channels are made primarily of aluminum. This product looks really very impressive. The box will fit harmoniously into a futuristic interior.
In structure, all the models listed above are very similar. They are fixed to the wall using special dowels or glue. The connections along with the cords are hidden under a decorative cover.
Sometimes it is much easier to make a cable channel yourself than to look for a suitable option in stores. The quality of the product and its appearance directly depend on your skills and abilities. The type of material used is also important. Working with PVC is much easier than working with metals.
Do you want something original and non-standard? You can make a cable channel from planed boards. The wires will be located between them. The wires will be covered with a decorative cover on top. As for the boards, they can also be painted in any color. Which will make them not stand out from the overall picture of the interior.
Under furniture
Mostly we hide the wires behind the TV. It is clear that if you look closely, all the cords will be visible. However, today you can buy special furniture that allows you to hide all communications.
To a greater extent we are talking about TV stands. They are equipped with special holes in which wires can be placed. It is very comfortable. Not to mention the fact that the cables will not be visible and therefore will not disrupt the interior design. Special headsets, which have an area intended for installing a TV, also allow you to hide the wires.
