Kitchen design with wall-mounted boiler. How to hide a gas boiler in the kitchen: options with photos

Is it possible to hide a gas boiler in a closet: decorating methods

Many owners of both private cottages and apartments in multi-storey buildings decide to disconnect from the heating plant and install autonomous heating. As a rule, a gas boiler is installed in the kitchen. An ordinary white unit can disturb the interior of the room, so they think about how to fit the boiler into the existing design.

A gas boiler can only be installed in non-residential premises, and the presence of a window and a door is mandatory!

The design of the part of the room where the boiler is installed needs to be thought out before installing the heating device.

Articles on the topic (click to view)

Which high-performance fruit and vegetable juicer is best to choose?
Kitchen faucet with drinking water filter
Rating of the best juicers for carrots, beets and celery
Table of color combinations in the kitchen interior
Press for squeezing pomegranate juice
Rating of the best auger juicers
Screw juicer “Bork”

How to hide a boiler:

Homemade chipboard box for the boiler. Ideally, the front panel of the box should coincide as much as possible with the facade of the kitchen unit.
Niche made of profile and plasterboard. The front part of the structure is also closed with a door to match the overall style of the kitchen.
Finishing the boiler with film or special paint.

When installing new furniture, you need to discuss in advance the size and location of the cabinet for the boiler. The wiring of communications is also taken into account, which can be hidden if desired.

Floor-standing AGV can be installed in the corner of the kitchen according to the installation rules. It is also allowed to hide the floor-standing boiler in a cabinet-cabinet, while complying with the standards and safety rules.

How can you disguise a gas boiler in a kitchen?

Various options for integrating a gas boiler into furniture are just one of the ways to conceal the unit in the kitchen. In some cases, it may not be hidden, but simply disguised. To do this, the body of the device can be painted to match the color of the kitchen interior. If it is possible to purchase a boiler in the color scheme that is already present in the kitchen, then this is an even simpler option. In these cases, the unit will not stand out against the general background, which means it will not attract special attention.

The boiler can be matched to the style of the furniture in the kitchen

An interesting and original solution may be not to disguise the boiler, but, on the contrary, to highlight it as a separate element of the interior - bright and conspicuous. There are many options here - this includes decorative painting, painting in several bright colors, and other ideas. Everyone can dream up and choose their own option that best suits the kitchen interior design.

To hide a gas boiler, you can take advantage of some features of the room layout. If there is a niche in the kitchen, it is convenient to place the unit in it, covering the outside with doors, a grill or some other decorative element. If there is a column in the room, the boiler can be hidden behind it, covering the entire structure, for example, with a screen.

It often happens that a gas boiler is installed at some distance from the kitchen unit. To hide such a free-standing unit from view, you can order a pencil case or build a structure in the form of a box yourself. In addition to the boiler itself, other kitchen utensils can be placed in such a pencil case, for which it is better to make separate doors for different compartments.

Communications can be hidden using special strips

Kitchens with a gas boiler: design and installation of a chipboard cabinet

If the gas boiler was installed after purchasing the kitchen set, and there is no way to hide it in one of the existing cabinets, you can decorate it with a homemade door. To make a boiler cabinet with your own hands, you will need chipboards and wooden slats.

In addition to the tools - tape measure, bolts, jigsaw and awnings, you will need a ready-made door that is closest in color to the kitchen facade.

Before starting work, you need to accurately calculate the dimensions of the gas boiler. The minimum distance from any side of the boiler to the cabinet is 3 cm, respectively, add 6 cm to the height and width of the boiler and select a door of this size.

Progress:

Using a jigsaw, you need to cut out the side walls of the cabinet from chipboard boards based on the measurements. The depth should also be 3-4 cm greater than the depth of the gas boiler.
Make holes in the bottom wall for water and gas supply pipes, and in the top wall for the chimney.
Use a crown to cut holes for furniture curtains on the right or left side.
Maintaining perpendicularity, fasten all sides of the cabinet together with bots. There should be no back wall; instead, attach two planks parallel to each other at the top and bottom.
Attach the fasteners to the kitchen wall using the fixed slats. Hang the cabinet door with curtains.
Attach the resulting structure to the boiler and hang it on the wall.

A wall-mounted boiler can be placed in the corner of the kitchen, mounted in a wall-mounted corner cabinet, or covered with the same homemade door. If desired, you can leave the device open and disguise it with beautiful decor - stickers or decals.

Kitchen in a private house with a gas boiler: installation rules and regulations

Placing a gas boiler in the kitchen requires certain rules and regulations. Failure to comply with them can lead to serious consequences. The room in which the gas boiler is installed must be at least 4 square meters, more than 2.5 m high, have a window and a door to the corridor. There must be a device in the kitchen that will notify you of a gas leak.

The power of gas boilers installed in the kitchen should be no more than 60 kW. The heating boiler can be installed on the floor or attached to the wall.

The gas boiler is attached to the wall, which is made of non-combustible materials. The boiler must not be installed close to cabinets; there must be space for air circulation between the appliance and the walls of the furniture.

In houses with wooden floors, it is recommended to cover the wall with a metal sheet.

The layout of gas and water pipes must be carried out in accordance with the rules. The gap between the boiler and refrigerator and gas stove must be at least 30 cm. The heating boiler is installed at a distance of at least 0.8 m from the gas meter at a height of 1.6 m. The electrical socket for the boiler is mounted at a distance of 1 m.

Expert opinion

Smirnova Ekaterina Anatolevna

7 years of experience in interior design, professional architect

After the boiler is installed and all lines are connected, it is strongly recommended to check its operation and the chimney draft - the safety of using the device depends on this.

Equipment installation requirements

When installing a gas boiler in a kitchen, you must strictly adhere to the relevant standards and regulations. Failure to comply can have serious consequences. The essence of such requirements is as follows.

The area of the kitchen in which the boiler can be hidden must be at least 4 m2, and the ceiling height in such a room must be at least 2.5 m.
The kitchen room in which it is planned to use a gas boiler must be equipped with a door with convection holes and a window with a window.
When equipping a kitchen with a boiler, there must be a device that reacts to a gas leak and emits a corresponding signal.
In kitchen areas it is prohibited to install gas heating equipment with a power exceeding 60 kW, while the relevant standards allow installation both on the wall and on the floor surface.
Installation of gas heating equipment on a wall is permitted if its surface is made of non-combustible material.
If you decide to install a gas boiler in the kitchen, you need to ensure that such equipment is not located close to the walls of the kitchen cabinets. This is necessary both to ensure air circulation and to minimize the risk of fire in kitchen elements. There must be a certain distance between the walls of such elements and the panels of the boiler body, which must be provided for at the stage of designing the kitchen interior and ordering furniture for its arrangement.

And finally, a couple of videos on the topic of camouflaging a gas boiler and communication pipes.

Kitchen interior with a gas boiler on the wall: how to hide communications

Having solved the problem of masking a gas boiler in the kitchen, the question often arises of how to hide the gas and water pipes leading to the appliance. The bulky, ugly chimney and hoses connecting the unit to the individual heating system are also not pleasing to the eye.

Under no circumstances should all elements be covered in the wall; they must be accessible if necessary!

Today, the most popular option for hiding communications is a box made of profiles and plasterboard, which can be covered with tiles or wallpaper. When installing the box, you should use moisture-resistant drywall.

The gas pipe can be hidden behind the kitchen unit. In this case, cabinets and bedside tables should not put pressure on the pipe; you need to leave about 1 cm of free space between them.

If the pipe runs at a height of more than 1 m from the floor, you can use it as a stand for towels. To do this, the pipe is cleaned of rust and covered with several layers of chrome paint - after drying, you can hang towels and napkins on it.

Corner water or gas pipes that cannot be covered with a cabinet can be decorated with artificial flowers or fruits, decorated with glass mosaics, or painted with colored paint to match the interior of the room.

We fit a gas boiler into the kitchen interior

Note! To install a gas boiler between kitchen cabinets, it is necessary to take into account the standards and safety rules. There must be less than 3 cm of free space on all sides of the unit to ensure ventilation. The sides of nearby cabinets must be treated with a special agent or consist of non-combustible materials.

Photo of a gas boiler built into a kitchen cabinet

If you are wondering how to hide a gas boiler in the kitchen, we can offer you the following option. To make the boiler completely invisible, you just need to build it into a special cabinet.

Instructions for creating a decorative cabinet decorating a boiler:

We take the dimensions of the unit and draw a sketch of the future structure. The dimensions of the cabinet should be 5-10 cm larger than the gas boiler itself in the kitchen.
To produce it, you can contact a company that makes kitchen sets.
If you are ready to do it yourself, you can order only the doors, matching the color of the rest of the kitchen. It is best that they are openwork. Then it will not only be a decoration for the interior of a kitchen with a gas boiler. Such doors will provide additional ventilation.
The prepared sketch of the cabinet can be applied directly to the floor and walls. The guides are parallel to the planes of the boiler. The profile will need to be secured along these lines.
In order to assemble the base of the box you will need profile sheets, a screwdriver and self-tapping screws.
Pipes from the boiler can be hidden under a metal frame.
The installed frame is covered with plasterboard and the front doors are hung. The surfaces are primed and, after drying, painted in the desired color.

Kitchen design with a corner boiler

Note! If the layout of the kitchen furniture allows, it is better that the cabinet does not have side walls. Also, it should not have a back wall, bottom, or top cover.

Considering that kitchen sets are mostly made to order, a special cabinet for a speaker is unlikely to be a problem.

How to hide a gas boiler in the kitchen, installed in the corner. It's very simple. It can be thought of as a corner cabinet. To do this, just cover it with the door.

Another way to fit a boiler is to choose kitchen units and appliances that match the style and color scheme of the gas unit. In this case, the kitchen facade can be made of colored MDF.

Kitchen facade made of MDF with built-in boiler

The price of MDF facades with a glossy finish is quite affordable. And the rich, deep color will add brightness to your kitchen. Another advantage of such surfaces is additional protection from the effects of temperature, moisture and mechanical damage.

Masking communications

In addition to the question of how to close a gas boiler in the kitchen, the question also arises of what to do with gas and water pipes, chimney, pipes and hoses. All of them are necessary for the installation and normal functioning of the unit.

Under no circumstances should pipes and hoses be embedded in walls! They must be available at all times. But decorating them is quite easy. For these purposes, you can use special boxes or panels that are included with the equipment. With their help, communications are closed; if the need arises, they can be easily removed.

Closing gas boiler communications with a wall panel

Ready-made boxes can be purchased in specialized stores or made independently from plasterboard or plywood. The finished structure, fixed to the wall, can be painted in the color of the furniture or boiler.

If your kitchen is decorated in modern or high-tech style, you can leave the boiler open. The main thing is that the color of the trim matches the kitchen furniture.

The following videos will introduce you to the structure of a gas boiler:

How to hide a gas boiler in the kitchen: the best design options and camouflage tips

If you are not an ardent supporter of the loft or techno style, then the appearance of the heating unit is unlikely to be enjoyable. After all, it is produced focusing on the mass consumer, and not on your personal taste. Naturally, you will think about how to hide a gas boiler in the kitchen so that it fits perfectly into the interior picture.

However, when it comes to camouflaging gas equipment, things are not so simple. In addition to finding the most suitable design option, you also need to take into account the standards. Compliance with the rules that ensure normal operation guarantees safety when using a gas hot water supplier.

We will tell you how best to hide the presence of a far from attractive object in the kitchen, taking into account the requirements of gas services and fire authorities. The article we presented describes in detail the standards for the location of gas equipment. Here you will find interesting and practical solutions for decorating kitchens with gas boilers.

How to hide a gas boiler in the kitchen - disguising the boiler + photos (24 photos)

The interior of a modern house requires compliance with the principle of harmony, so many people install a boiler in the basement, make a small extension to the house, or use part of a room for a boiler room. But what about apartment owners who have to purchase and install a boiler in this case? Where can I find a place for it so that it does not spoil the appearance of the room in which it will be installed? Since heating appliances can be floor-mounted or wall-mounted, we will tell you how to hide a gas boiler in the kitchen, taking into account not only its features, but also the interior of the room.

You need to know this first

It is quite understandable that every person wants to make the boiler practically invisible, and many succeed. But it is important to know the standards in accordance with which you can act, otherwise, after inspection by the relevant authorities, you will have to redo everything. Let us dwell in more detail on the main provisions.

The boiler must not be installed in rooms that are not equipped with a ventilation system.
If the boiler is turbocharged, it can be placed in a closed cabinet, with a distance of 3 cm from the walls.
For an open type boiler, it is necessary that the cabinet has no bottom or top, and the door has bars.
There must be a distance of at least 3 cm between the side walls of the boiler and the cabinet. From above? 35 cm. Bottom? 25 cm of free space.
Although the walls of the boiler do not get very hot, it is often required that the walls of the furniture be lined with non-flammable materials.
It is better to install and adjust the boiler first, and then sew it up.
There should be no electrical appliances (refrigerator, washing machine or dishwasher) under the boiler, since when the PSC is activated, water will fall on these appliances.

After weighing the pros and cons, you can think about options for possible camouflage of the boiler.

Possible disguise options

In order to hide a boiler, it is not always necessary to cover it. The right approach will help hide the cauldron from view, camouflaging it, because it is completely different from its predecessors. Let's consider several ways.

Black interiors (44 photos)

So, taking into account the features of the kitchen, you can:

make furniture to order, taking into account the installed boiler;
take advantage of the existing features of the kitchen premises when placing the boiler;
integrate into a kitchen set;
disguise the boiler with decorative elements or highlight it so that it becomes part of the interior design.

After soberly assessing the furnishings of your kitchen, choose the appropriate option.

Furnishings for the boiler

If the kitchen is under renovation, then it is quite possible to order furniture whose dimensions and design will allow you to hide the boiler from view. The advantage of this method is that specialists will take everything into account in advance, and an ignorant person will only guess about the location of the boiler.

If you have not purchased a boiler yet, you can choose a color that would harmonize with the furniture, or order furniture to match the color of the heater cover.

Taking into account the current situation

If you plan to install a boiler without changing the situation in the kitchen, then do not forget that first of all you need to take care of compliance with the standards described above. Also, the boiler should not be located close to the meter - the distance is at least 1.5 m and the location of the chimney duct must be taken into account. Most often, the boiler is installed between cabinets or in a corner, in the same row with them.

Such restrictions, no doubt, make their own adjustments, so there is little room left for flights of fancy.

How to integrate into a headset

Let’s immediately make a reservation that it is not always possible to integrate a boiler into cabinets already mounted on the wall. This is primarily due to the fact that in most cases the dimensions of the boiler will not allow it to be inserted into existing niches. In addition, even if this can be done, you will need to remove the back wall of the furniture.

If the width of one cabinet is not enough, then you can combine it with the adjacent one. Often it is not possible to fit a boiler into old furniture because of its height or because the cabinet is not deep enough. In this case, it is better to dismantle this part of the cabinet and install a new one, made to your measurements, in its place.

Two in one: bedroom-office (3 photos)

Boiler as part of the interior

It is not always possible to hide a wall-mounted boiler in the kitchen due to the peculiarities of this room. In this case, after installing the boiler, you can try to work on it so that it does not catch the eye.

Modern gas equipment has an attractive design, often with a digital display. Such equipment not only will not spoil the appearance of the room, but can also become a successful addition to the design.

If the boiler does not fit into the interior, then it can be camouflaged with branches of artificial plants.

You can also paint something or simply repaint it by choosing the paint of the desired color.

There are many options to help hide or decorate a wall-mounted boiler. You can see possible options in the “Photo” section.

How to hide a floor-standing boiler

A floor-standing gas boiler has a less attractive appearance and therefore it would be preferable to completely hide it from view. But if you can still do this procedure with a heating device, then how to hide the pipe of a gas boiler? There are several options here.

Making a niche out of brick and covering the pipe with it is not always possible, since the load on the floor will increase significantly. In addition, such actions need to be coordinated with many services, so we won’t even consider this method.
Purchase a box specially designed for this purpose and use it to close the pipe.
Lead the pipe directly into the chimney channel.
Buy a parapet boiler.

When using a parapet boiler, it is easiest to hide it in a closet. The fact is that air is taken in and combustion products are removed through a pipe located behind the boiler. There is no need to worry about ensuring air flow to the device. All you have to do is order a cabinet of the appropriate size or make it yourself. First, the boiler is installed and all communications are connected to it, and then the cabinet is installed.

Online store "Pandrev" of European and Belarusian furniture. (1 photo)

As you can see, there are many methods that help preserve the interior of the kitchen by hiding a gas boiler in it.

Video

After watching this video, you will know for sure whether it is possible to close the gas water heater with a cabinet:

Find out another way to help hide the NAVIEN Ace gas boiler:

Photo

LiveJournal

Standards for premises and equipment

Before you start developing a unique design for arranging a kitchen with a gas boiler or choosing a ready-made solution for its design, you should find out how the room should be equipped for the operation of gas equipment.

It is important to decide in advance on the type of boiler that can be used in a private or multi-storey building. You should find out what needs to be done to ensure complete security. Only then will it be possible to select a camouflage method that does not violate regulatory requirements.

Requirements for organizing gas supply

The regulations state that:

Installation of a boiler that processes gas to prepare coolant or sanitary water is allowed only in buildings with up to five storeys inclusive.
In the kitchen of a separate apartment in a high-rise building, boilers with a capacity of up to 35 kW are installed. These are mainly wall-mounted flow-through heat generators (columns) that supply sanitary hot water.
In the kitchens of private houses, if it is impossible to arrange a separate boiler room, it is allowed to install a boiler with a capacity of over 35 kW, subject to all safety measures and measures regulated by regulations.

In private houses with autonomous communications, it is recommended to organize boiler rooms with a pair of boilers separate from the kitchen. It is best to have a floor-standing boiler prepare the coolant. But it is advisable to entrust the heating of water for sanitary and hygienic purposes to a gas water heater or a capacitive water heating unit (boiler).

It should be remembered that the total heating output of the two boilers involved, located in the same vat, should not exceed the technical limit of 100 kW. Please note that installation of gas boilers is allowed in corridors if they have transoms for ventilation. It is no longer possible to install any gas boilers in bathrooms.

Rules for arranging a kitchen space

Installation and subsequent operation of gas water heating equipment is allowed in kitchens with a ceiling height of not lower than the limit of 2.0 m specified in building regulations. If the height of the room is reduced due to the installation of a suspended/stretch ceiling, it is dismantled or switched to the electric type of hot water preparation.

If, in addition to a gas boiler, there is also a gas stove in the kitchen, the minimum ceiling height should be 2.2 m. The distance from the floor plane to the ceiling in the boiler installation area should be the same if the ceiling in the kitchen is built with a slope.

Installation of a gas boiler can be carried out in the following premises:

volume 7.5 m³, if only one unit is to be operated;
volume of 13.5 m³, if two heat generators are used in preparing the coolant and heating the water.

The cubic capacity of kitchens equipped with both boilers and gas stoves is calculated as the sum of 6.3 m³ plus 8, 12 or 15 m³ depending on the number of burners (2, 3 or 4 pieces).

The room for the location of gas equipment of any type must have its own source of natural light, i.e. window. The window must have a freely opening window. It is necessary for ventilation with a natural impulse to move the air mass.

There must certainly be a door limiting the kitchen space. However, it should not interfere with air flow.

Therefore, it is necessary to provide a ventilation grille at the bottom of the door leaf or leave a gap between the door leaf and the floor. The total area of the ventilation gap is at least 0.2 m².

In kitchens with a gas water heating unit, especially those equipped with atmospheric gas burners, there can only be natural ventilation. Forced options with mechanical stimulation and the addition of heated air are permissible only in the northern regions.

Features of boiler selection

Individual heat generators - factory-made water heating units - are suitable for installation in the kitchen. Both flow-through wall-mounted models and floor-mounted ones paired with boilers are applicable.

You should purchase automated equipment that can function without constant maintenance by the operator/owner.

The following water heating units can be used in the arrangement of apartment buildings:

turbocharged, i.e. equipped with a sealed (closed) chamber for processing blue fuel;
capable of heating the treated environment to 95º;
operating under a pressure of 1 MPa;
equipped with automatic security.

Safety automation is needed to interrupt the gas supply to the burner in the event of a threatening situation. Threats include malfunction of protection circuits, a drop in pressure of heated water or coolant, flame extinction, and malfunctions in the smoke removal system.

Expert opinion

Smirnova Ekaterina Anatolevna

7 years of experience in interior design, professional architect

In the same way, the automatic device will stop the operation of the boiler if the heated medium reaches the temperature set by the owner or the maximum permissible temperature.

In the kitchens of apartment buildings in our country, heat generators with an atmospheric (open) combustion chamber are traditionally installed. They heat water for owners of apartments in old housing stock, in which centralized hot water supply was not previously provided.

Fire prevention standards

Before deciding how and what is the best way to close a gas boiler installed in the kitchen, we will look at the rules for preventing accidental fire of adjacent or nearby surfaces and structures.

To prevent and prevent danger, you need to:

Provide a space of 2 cm from the walls of the flow-through wall-mounted boiler to all adjacent surfaces around the perimeter.
Create a distance of 10 cm from the floor-standing boiler and cylinder water heater to the surfaces.
Protect the walls of a building made of flammable material with plaster or cladding of non-combustible/hard-to-combustible finishing types. In this case, there must be at least 3 cm between the boiler and the wall.

When using tiles in wall decoration, it is allowed to reduce the distance from the walls when placing floor equipment. The geyser can be hung flush against a tiled wall.

The function of insulating flammable walls can be successfully performed by roofing tin on an asbestos sheet with a thickness of at least 3 mm. A similar tandem of tin and asbestos is laid on the floor before installing the floor model. The protective finish must be at least 10 cm larger than the outline of the insulated equipment.

All of the listed types of gaps and indentations are necessary for continuous cooling of water heating equipment.

Specifics of the location of the gas unit

Gas heating equipment is installed according to the design, which takes into account the type of wiring, the position of the expansion tank and the circulation pump. If a wall-mounted device, for example, only prepares hot water for hygienic use, then place it as close as possible to the water collection point.

According to regulatory requirements:

The distance between the column and the kitchen sink can be at least 30 cm.
The distance between the wall-mounted water heater and the gas hob can be at least 10 cm.
The distance between the floor heat generator and the refrigerator is specified by the boiler manufacturer. Usually, at least 30 cm is indicated. The same size is acceptable for other household electrical appliances.
The distance from the top edge of the parapet boiler to the ceiling is at least 80 cm.
The distance to the outlet required for powering volatile gas boiler systems must be at least 100 cm.

The most important rule that should be followed when installing any type of boiler is to ensure unobstructed access both directly to the unit itself and to the most important components that require regular inspection and maintenance.

Decoupage

Today, the decoupage technique is in great demand. It consists of finishing surfaces with decorative materials - napkins, which are fixed with PVA glue and varnish for reliability. In this case, you can choose any color and pattern that matches the style of the room.

Article on the topic: How to fit antique furniture into the interior in an original and beautiful way

Requirements for installing a boiler in the kitchen

The kitchen layout is carried out taking into account the requirements that apply to the installation of gas heating equipment. Current regulatory documents define:

The presence of a door separating the kitchen and other rooms.
Minimum requirements for window openings.
The presence of supply and exhaust ventilation.
Location of the socket, boiler pipes.
Requirements for the smoke exhaust system.

The interior of a kitchen with a gas boiler on the wall or floor must strictly comply with current SNiP and sanitary standards. If gross violations are detected, a representative of the Gas Industry has the right to turn off the gas supply and impose penalties.

Do I need a door to the kitchen when installing a gas boiler?

The requirements for installing gas heating boilers in the kitchen stipulate that the room must be fenced off from the corridor and living rooms with a door leaf. It is strictly forbidden to replace the door with an arch.

Doors in a kitchen with a gas boiler installed should not have a lower threshold for unhindered air circulation. As an alternative, it is allowed to insert a convection channel into the canvas, covered with a decorative panel.

Do you need a window in the kitchen if there is a gas boiler?

The rules for placing a gas heating boiler in the kitchen, in particular SP 54.13330, stipulate the need for a window opening with an installed window. Strictly speaking, metal-plastic double-glazed windows with an opening window (without a window) are a violation of the norms. But usually representatives of the gas service do not pay attention to this.

The window, like the convection openings in the door to the kitchen, is necessary to ensure continuous circulation of air flow. If you want to integrate a gas boiler into kitchen furniture, it is important to carefully choose the location so that it matches the direction of the circulating air. Convection holes are also made in the facade of the furniture.

Ventilation in the kitchen with a gas boiler

What should the ceiling be like in the kitchen?

According to this rule, it is not recommended to install a suspended ceiling in the kitchen if you plan to install gas-fired boiler equipment. The use of plastic panels is prohibited. It is recommended to use gypsum and cement-sand plasters with subsequent painting of the surface.

Where should the boiler socket be installed?

The distance from the gas heating equipment to the outlet is specified in the operating instructions. This requirement is controlled by Gaznadzor authorities. The electrical socket for the boiler should be installed no closer than 1 m.

Another requirement is the correct location of the refrigerator in the kitchen, relative to gas heating appliances. The minimum distance must be at least 30 cm. The gap is necessary for servicing the boiler.

How to hide gas boiler pipes

How to remove a chimney from a kitchen for a gas boiler

In order to correctly position a gas boiler on the wall in combination with a kitchen unit, you will need to take into account the passage of the chimney. Boiler equipment is installed as close as possible to the place where the chimney goes out onto the street. This way, you can avoid the need to drill holes in the cabinets for the passage of the chimney.

The coaxial chimney is discharged through the wall. Atmospheric models are connected exclusively to a specially designed exhaust duct.

The requirements and standards stipulating the installation and placement of gas boiler equipment in the kitchen require strict compliance. To avoid mistakes, you should consult a gas service inspector.

Design of a gas boiler in various styles

Whether the boiler is highlighted as an original element of the interior or, conversely, hidden depends on the chosen stylistic approach to kitchen design.

Classic

The classic direction does not accept the presence of any household appliances in the interior. Therefore, the best way to design a boiler in this case is to camouflage it. A good solution here is to create a cabinet of suitable dimensions, taking into account all the necessary safety requirements. The facade of the furniture set will reliably hide the unit and will not change the overall harmony of the room.

To ensure that the gas boiler does not disturb the ergonomics of the kitchen, the right solution would be to locate it in the very corner of the unit, while ensuring free access to it.

Provence or country

Rural styles are characterized by simplicity and unpretentiousness. To decorate a boiler in a kitchen in Provence or country style, you need to use one of the original design techniques:

Hide it with printed textiles. Cotton and linen are the main components of rustic designs, so light curtains chosen to match the napkins, sofa cushions and curtains will become the highlight of the interior, highlighting and deepening it. The photos below will help you verify this.
Creating a camouflage cabinet. The most suitable for this style and at the same time safe is a cabinet with a lattice door. It will demonstrate the style of the interior and will not violate safety regulations. The camouflage box can be decorated with wallpaper to match the walls or with paint.
Decoupage or simply painting the boiler in a suitable color will help solve the problem.

Loft

When designing a kitchen in an industrial loft style, an appropriate element of the interior can be either an out-of-date bulky boiler or the latest generation equipment. This direction welcomes the display of all utilities: gas and water pipes, electrical wiring and more.

Therefore, camouflage of the boiler is not required. Moreover, its original highlighting and focus on its aesthetics is most inherent in this version.

High tech

High-tech style cannot be imagined without innovative kitchen equipment. When creating an interior, you will need a boiler of the latest generation with original lighting, with a chrome-plated shiny surface, reminiscent of a space unit. Masking the boiler is not required, nor is decoupage or painting.

The most acceptable option here is the ergonomic arrangement of this equipment next to other kitchen appliances that match it, and its neon glow will create a special mood and comfort in the room.

Original design solutions allow you to turn a gas boiler in the kitchen into a highlight of the interior or reliably disguise it.

Is it possible to hide a gas boiler: safety standards

The regulatory documents do not say anywhere that it is prohibited to hide a gas boiler. However, there are certain requirements that must be met:

The room where the device will be installed must have a window and an entrance door. The room should be well ventilated.
It is strictly prohibited to install the product near a refrigerator, gas stove, or sink. The distance must exceed 30 cm.
If the model is hidden in a closet, it is necessary to remove the bottom and its upper part. It is advisable to make the cabinet door lattice.
It doesn’t matter at all where the device will be placed, in a closet or in a niche. The walls of this room must be lined with special fire-resistant material.
When installing the product, it is necessary to create an air gap. From the walls to the boiler, there should be more than 3 cm around the perimeter.
A sensor must be installed in the room to detect gas leaks.
It is allowed to hide the unit if its power does not exceed 60 kW.
It is necessary to create free access to the device. Its “dead” installation in the wall is prohibited.

Reference! Compliance with these rules is mandatory. Don’t forget about them to create an attractive look. Compliance with these requirements does not exclude a design approach to solving the problem associated with the installation of the unit.

Safety rules when installing a gas boiler in the kitchen

Before you think about how to hide the unit, you should study the rules for its operation and installation.

In order to ensure ventilation, there must be at least 3 cm of free space on all sides of the appliance.
The side walls of furniture located nearby must be treated with a fire retardant or made of non-combustible materials.

Remember that the room where the boiler is installed must be equipped with a door and a window with a window. The unit must be present on the apartment plan; moving it to another location without the approval of the relevant authorities is prohibited.

convenient location in the corner

boiler hidden in a kitchen cabinet

Gas boiler in the kitchen - 25 examples of how to use it in the interior

Your repost will change the Internet