DIY hanging chair

6727

Lovers of comfortable outdoor recreation often equip their suburban areas with gazebos, hammocks, and swings. And relatively recently they began to use hanging chairs, in which it is convenient to relax reclining. They can be placed both outdoors and in the house. They provide relaxation and peace for the sitter, and in a large house they will certainly become an interior decoration. Making a hanging chair with your own hands is not at all difficult. To do this, it is often enough to use improvised materials and simple tools.

How to make a swing nest with your own hands

1. Planning the load
2. Assembling the base
3. Making supports
4. We mount the slings
5. We weave the seat

The suspended circle is capable of swinging in different directions and rotating. If you make weaving inside it from an elastic material, it will also spring. A device for active games easily turns into a place for sleeping or reading. The awning on top will protect from rain and sun. You can move the fastenings under a canopy or indoors.

Not only the dacha is suitable for street fun. The ceiling in a panel house can withstand even the weight of an adult.

How to choose ready-made swings

Factory-made structures are reliable and meet all technical parameters. However, a quality product must be provided with the following information:

• manufacturer - indicate the name of the enterprise, official address, article number, GOST or TU;
• load capacity and other technical characteristics;
• recommendations for fastening and operation;

When choosing, the equipment and design are taken into account. Nest swings are available for sale in various colors, weaves, with a set of supports and fasteners.

Important. You cannot purchase “no-name” products without indicating the manufacturer or technical characteristics, even if their price is very attractive. The reliability of such swings is questionable.

Calculating the load

Whatever the mounting pattern and the size of the base, the same essential principle is always used when creating them. It lies in the fact that the structure needs a margin of safety, especially if there is a child in the house. After all, active children's games are a real crash test for everything involved. The supports must be stable. Under no circumstances should the slings be allowed to break or the racks to topple. You need to carefully plan all the details and draw a diagram in compliance with the proportions. This makes it easier to see and eliminate technical defects, as well as improve decorative ideas. The work will go faster if you think in advance about what materials will be used and purchase everything you need in advance.

Placing furniture along the walls is a thing of the past. Don't be afraid to place a table or sofa across or even in the middle of the room.

Lite Weights Hanging nest swing 100 cm

How to make a swing-nest yourself by assembling all the elements with your own hands? First you need to determine what load they must withstand. Their parameters and choice of material depend on this. You should consider the method of installing slings, the design of suspensions for the seat, and the installation of supports if you plan to use them. After this, you can move on to the sketch of the woven mesh and other design details.

How to choose a round spider web swing

The unusual Spider Web swing is a decorative addition to the playground. The appearance of the device will attract neighbors and their children. The height of the product is selected at will - it can be adjusted for both an adult and a small child. The nest can also be an addition to a summer cottage in a children's corner. When choosing a model, it is recommended to pay attention to:

• manufacturer;
• presence of support;
• maximum load;
• manufacturing material.

Manufacturer

The first country producing the Nest swing is Belgium. produces children's play equipment for playgrounds: slides, climbing ropes, spring balancers. Today there are already domestic models that are presented in online stores. The devices are suitable for a children's entertainment corner in a house, apartment, or country house. Options for equipping playgrounds can be seen in the photo.

Accommodation

Thanks to its convenient design, the product can be hung outside, in the countryside or at home. It all depends on the size of the proposed structure. There are several sizes of product models:

• A small model can be hung not only on the street, but also in the house, but the downside is that a large number of children will not fit on it (for example, KBT Oval bench seat).
• Medium and large ones can only be hung in the yard. The advantage of this type is considered to be the placement of a large number of children on one product (for example, Swing Nest Hit M 1200 mm).

• Champignons in the oven: recipes for baked mushrooms
• How to remove paint from clothes
• Quick pickled cucumbers in a bag

Availability of support

The device has a certain support. It is made from dry laminated timber of different heights. The manufacturer provides at least 60 cm plus the main size for laying in the ground. The structure is located in the shape of the letter “A”. In the middle there is a circle with a net on which you can sit. As an example, pay attention to the swing model garden nest Hit 120 cm at qpstroy.ru.

Another option (suspended) is to hang it on a certain structure (if in the house - a hook in the ceiling, if outside - a tree or beam). On this design, the support involves a cord or rope on which the seat is attached. Before purchasing, it is recommended to pay attention to the quality of the rope and the maximum weight. An excellent choice is the Samson Nest swing model, presented on the Ozonsport online resource.

Maximum load

The maximum permissible load depends on the type of swing. That is, if the finished models are small in size, then a maximum of 2-3 children will sit on the seat - large weight can lead to rapid breakdown of the product (round hanging swing Nest on Sportpower). The product can accommodate up to 6 children on the seat, the reliable frame will not break, and the cords that hold the seat will not crack (for example, “Igragrad Nest 120 cm Multicolored” on the Papajoy website).

Material of manufacture

When manufacturing the round swing Nest, only high-quality and reliable materials are selected, such as metal pipes of various diameters, which provide additional precise fixation of the “web” (for example, Samson Nest Hit). The seat is wrapped in a mesh of decorative cords, and to provide additional comfort, you can purchase a synthetic pillow with filling. The supporting frame is made of wooden beams (model garden “Nest” Hit 120 cm).

Assembling the round base

For preschool children, a plastic or aluminum hoop with a diameter of about 75 cm is suitable. Aluminum has higher strength.
In weight it is no different from plastic. For a child weighing over 50 kg, it is better to take a stronger base. A steel gymnastic hoop with a diameter of 75 cm or more is suitable. To increase resistance to stress, take several hoops and tie them in a stack. This design allows it to support the weight of several schoolchildren.

Other products are also used as a base, for example, a steel water pipe about 4 m long. To bend it, you will have to contact specialists. The metal should not be too thick - excessive massiveness is not needed. Loops for slings are made from clamps from a car muffler, thick rods, and metal parts of a suitable shape. They are welded to the base or fastened with screws.

You can do without loops. The slings are simply tied or fastened to a carabiner.

The braid is the loops of the inner mesh. If necessary, the winding is made of ropes and fabric. Synthetic winterizer and raincoat fabric are highly resistant to abrasion. The layer is foam rubber or felt.

The base does not have to be shaped like a perfect circle. It can be an oval or a rectangle with rounded edges.

DIY swing chair made from boards

A DIY swing chair made from boards is a pretty good and easy-to-make option for hanging furniture structures. You don't need to have specific carpentry skills. We will tell you how to process the boards and drill the holes needed for construction in them. There are several options for making a hanging chair from boards. We will share with you recommendations regarding two methods.

In order to build a chair using the first method, you need to “arm yourself” with the following materials:

• boards with the following dimensions: their length should be 60-70 cm, width 12-15 cm, thickness 10-15 cm. You need 16 well-processed boards;
• nylon cord 10 m long;
• water-based varnish to cover the chair.

The tools you will need are a hacksaw, or better yet, a jigsaw, sandpaper, a drill and wood drills with a diameter of 6, 8 and 10 mm.

Follow this step-by-step technology for making a hanging chair.

1. First of all, you need to prepare the boards: select them of the same specified size, remove the nails, if any, saw off the parts with holes from under the nails, make the surface perfectly smooth by sanding it or using sandpaper.
2. On treated boards, you need to drill through holes along the top and bottom lines along the entire length. The distance between the holes should be 5 cm.
3. Next comes the laying of the boards, starting from the bottom and placing the next block on top tightly to each other. The nylon cord must be threaded through the holes diagonally, thus fastening the boards together, that is, it is necessary to connect the side edges of the two boards with a cord.
4. According to the previous principle, you need to thread the cord from the reverse side, so that you end up with crosses connecting the boards along the holes. We do not recommend pulling the cord tightly in, since to form a chair you need the boards to be quite loose. After you pass the cord through all the holes, you need to secure it with knots on the back side of the chair.
5. The next step is drilling holes for hanging the chair. They are made on the top board from below and on the second board from above, retreating 3-4 cm from the edge equally on both sides relative to the center of the block.
6. Now the chair is ready. For complete comfort, you can throw a blanket over it and take out a couple of pillows. Alternatively, you can build a wooden frame so that the cords stretch at the desired distance, rather than being connected in a pyramid at the top. It is done slightly below the suspension point.

The second option for making a swing chair is considered more child-friendly, so making it is even easier than following the first method.

Prepare the following materials for constructing the structure:

• boards, the length of which will be 50-70 cm, width 5-6 cm, and thickness 1.5-2 cm (14 pieces);
• a nylon cord 10 m long and 1 cm in diameter;
• self-tapping screws, the length of which is 1 cm, and the caps are wide.

If you take already processed lumber, then you only need a screwdriver for the job.

Follow the step by step instructions:

1. First of all, you need to lay out the boards parallel to each other, laying them with the wrong side up, leaving a distance of 1 cm between the bars.
2. As soon as the boards are laid, you can braid the bars with a snake-shaped cord, stepping back from the edges 4-5 cm, first in one direction, and then in the next, until all the boards are pierced with cord. Wrap tightly so that if something happens, the boards don’t fall out.
3. On the bottom board of the chair on its underside, you need to align both edges of the cord and press it with a self-tapping screw. An identical operation is performed with the cords and on the wrong side on the top board.
4. Now you need to use self-tapping screws to secure the cords with which you wrapped each board on the wrong side on both sides of the beams.
5. Finally, you need to attach the straps and hang the finished chair in the location you have chosen.

We sorted out the hanging swing chair made from boards.

Making supports

In room

Before you make a swing-nest with your own hands, you need to prepare the place where it will hang. If a garden veranda or gazebo is chosen for their placement, you need to be sure that the ceiling is strong enough. It should be noted that constant rocking will gradually weaken the load-bearing wooden beams and rafters. Reinforced concrete and brick cope well with external influences, but these materials also have their own resistance limits. The reliability of the floor slab in the apartment is beyond doubt. It can easily withstand a weight of 100 kg, but a children's swing is more suitable for a summer house.

Buy a round swing with mesh - review of models

You can buy the Nest swing at any store. However, not all models are available at one outlet or another. Paying attention to the above criteria for choosing a product, you can find suitable models on the Internet that can make your yard or apartment even more comfortable. The following are products that are popular among children and can be purchased in the online store.

Cloud Castle

The large garden swing “Cloud Castle” has the following dimensions – 1500/2000x1100x850 mm. Suspended with a climbing safety rope, its length can be adjusted from 1 to 2.5 m. The device can withstand a maximum load of 100 kg. The body is made of metal - a steel pipe with a polymer color, which prevents corrosion. The frame is approximately 90 mm thick.

Hit

Unusual Hit products have two functions: they can rotate around one axis or swing on two. Main characteristics of the model:

• maximum load – 200 kg;
• product diameter is about 1.2 m;
• silicone bushings have holes to prevent rubbing of the rope;
• the base is made of steel pipe (wall thickness - 1.5 mm);
• the seat is woven from twisted polyamide rope (8 mm), which ensures strength;
• The hangers are made of three-strand rope (15 mm thick), which makes the device reliable.

• Recipe for classic cream for Napoleon cake
• What is innate immunity - mechanisms and types. Factors of innate immunity
• Catering - what kind of service is it? How does an off-site restaurant work for organizing banquets and buffets?

Play Garden

The diameter of the Play Garden round nest swing is 1 m, and the length of the ropes is 2 m. Intended for children over 3 years old. They can be hung in the yard and at home. The set includes:

• rope (4 pieces);
• swing Nest (1 piece);
• galvanized steel carabiner fastening (2 pieces);
• galvanized steel carabiner ring (4 pieces).

Suspended swings have a special cushion for greater comfort. The design is resistant to environmental influences, as they are made of safe and high-quality materials:

• frame diameter – 61 mm;
• maximum hanging height – 2 m;
• maximum load – 150 kg.

Multi-seat KVT

The popular multi-seat “Nest” of the KVT company is made of reliable materials that are resistant to various mechanical damage and high or low temperatures. Rope rope is used for seating, and galvanized steel is used for fastening. Main characteristics:

• design size – 75x835x1080 mm;
• the diameter of the rope rope is 1 cm;
• maximum load – 150 kg.

Hanging Samson with mesh

The medium hanging swing Samson can be placed in the yard or at home. They are cheaper than models mounted on wooden beams, but no less reliable. You can seat 2 children, although the product is considered a single-seater. Ropes can protect the structure from falls. Main characteristics of the model:

• maximum load – 100 kg;
• seat dimensions – 100x100 cm, weight – up to 8 kg;
• a mesh nest made of rope (8 mm) is wound around the frame of the basket;
• rope for attaching the basket – 18 mm;
• main fastening rope – 18 mm,
• frame material – metal.

With Hudora tent

Hanging swings from the manufacturer Hudora are equipped with a tent and have a frame made of polypropylene pipe. They can swing with one axis of rotation. The product can be used at home or outdoors. Main characteristics:

• the removable tent has windows and its size is 123 cm;
• height can be adjusted from 1.4 to 1.9 m;
• maximum load – 100 kg;
• product dimensions – 110 cm.

Sport Elite WHSW002-110

The round rope swing Sport Elite WHSW002-110 has overall dimensions Ф60хФ60хН5 cm. When using an additional pillow, it can be used as a cradle seat. The fastening rings are located along the edges of the ropes, with their help you can hang the swing on hooks at home or in the yard on any support. The product is suitable for children over 3 years old. Characteristics:

• frame material – 10 mm PE, steel F25/1.1;
• powder coated metal frame;
• maximum load – 100 kg.

We weave the seat

A tarpaulin with sewn loops is sometimes used as a covering, but it is much more interesting to make a real nest with your own hands. It is better to use jute ropes. Polypropylene products do not hold their shape well and stretch greatly over time. For children, a diameter of 5-8 mm is suitable, for adults - up to 15 mm. The required length is from 25 cm. To make the back, you will need twice as much material, since the covering in this case will have to sag, forming a hemisphere.

The covering can be woven from other materials. The main thing is that they do not tear, withstand the required weight and are not afraid of moisture. One of the simplest weaving patterns is “Web”.

How to weave a swing-nest using the “Spider Web” pattern

• Markings are applied to the circle, dividing it into eight equal segments.
• A piece equal to two diameters of the base is cut from the rope and attached to its two opposite sides. Its length must exceed the diameter by several centimeters so that a knot can be tied. The tension should be made weak so that as a result, when sagging, a hemisphere is formed. With a diameter of 1 m, the sagging will be about 10 cm.
• The other three pieces are attached in the same way. In the center they should be intertwined with each other so that they converge at one point. The knot should not move, so it is stitched with strong nylon thread, fixing all its parts.
• All loops and knots located on the circle are sewn with thread.
• The edges should be soft. They are wrapped in foam rubber or felt, covered with raincoat fabric or other fabric that is not afraid of moisture and is highly resistant to abrasion. In the interior, upholstery can be made of soft fabrics. If there are loops, you need to leave slots for them, covering them with threads, otherwise the holes will gradually begin to creep apart.
• When the base is ready, we begin to weave the web. To do this, we wrap the diameters with rope rings, or make a spiral out of them. We fasten the joints with knots and stitch them with threads. The distance between the rings is 2-4 cm. It is quite difficult to calculate the exact amount of material. It's better to stock up for future use - otherwise you'll probably have to go to the store.

Also watch the video on how to make a round swing-nest with your own hands, namely, weave a seat.

The stand, seat and hangers are ready. Now it's just a matter of putting them together.

Where and how best to place the swing?

The moment has come when you can freely admire the result of your painstaking work...

Still can't figure out the location?

Yes, this is not an easy question. But nothing is impossible or unsolvable. Follow the tips described in the article, and you will very soon enjoy the delights of a swing!

• Choose a flat area. To ensure safe and comfortable riding, beware of uneven areas.
• Be mindful of the space required. Whatever type of swing you choose, free space is something you can’t do without. Make sure that you do not crash into trees or other objects during operation. There can be flower beds with your favorite flowers on the sides, but not in front.
• Surface reliability. Once again we would like to draw your attention to the safety rules. Choose an area that is not only level, but also fairly stable.
• Install the swing near a fence or any other barrier. This will limit the risk of rotation around its axis, keeping you safe.

Position the swing so that it is easy to control from the outside. This will prevent many undesirable situations, because... for example, you can keep an eye on your child while away.