Advantages and disadvantages of wall-hung toilets

These sanitary fixtures have a number of the following positive aspects:

• Toilets of this variety are distinguished by their compactness, occupying a small amount of free space and visually expanding the room.
• Many hanging-type models have a half-flush mechanism, which makes it possible to save water during flushing.
• The stylish appearance of such toilets can be easily combined with different room interiors.
• Thanks to this arrangement of the product, the floor can be decorated in any most suitable way - from a classic tiled pattern to a self-leveling coating with a 3D effect, while fully maintaining the integrity of the composition and without displacing the existing image.
• When installed, all pipes and other communication systems are hidden through a special installation, thanks to which the bathroom acquires a more aesthetic appearance.

  

• Some more expensive models have an automatic drain.
• In general, wall-hung toilets produce less noise than conventional products, since the installation often includes an additional soundproofing layer.
• The absence of a leg and the presence of free space under the thicket helps simplify the cleaning process.
• Expensive models generally have a special dirt-repellent coating, which makes it much easier to maintain the product in proper condition. In addition, its presence protects the toilet and installation from rust and dirty deposits.

In addition, hanging products are characterized by a high level of strength, reliability and long service life.

Despite many positive qualities, toilets of this type also have some disadvantages:

• Price. Wall-hung toilets are available in different price segments, but in general they are an order of magnitude more expensive than conventional products with similar characteristics.
• Difficult to install. It is quite difficult to install a wall-hung toilet efficiently without the appropriate knowledge and experience. It is best to trust the installation to qualified specialists. Otherwise, before installing a wall-hung toilet with your own hands, you must first become familiar with the correct technology and carry out all actions in accordance with it.
• Problematic access to communications. In some cases, there is a need for access to sewer pipes and water supply, but due to the false panel that covers the installation, getting to them becomes much more difficult.

Before choosing a toilet, you need to weigh the pros and cons, as well as its characteristics, and only after that should you finally decide on the choice of a model with the availability of the most suitable type of design.

Rating by manufacturer

No matter how patriotic we are and how much we love our Motherland, the quality of plumbing in our country is much worse than in European countries. But before choosing even a domestic manufacturer, you need to decide which company to give preference to. And for this you need to know the rating by manufacturer.

And, despite this, we shouldn’t talk about whose company is better either. The biggest sin is suffered by some companies that establish their branches in Asian countries and the countries of the former USSR. Such toilets are much lower in quality than the original. But because of the brand they cost the same.

Sanita is a Russian manufacturer of sanitary ware. It is one of the main suppliers to domestic markets. The equipment the company uses is German, as are the raw materials. It makes products from high-quality porcelain, but the models do not have an anti-splash system.

Jika - a Czech company makes a wide variety of models. The range includes floor and hanging options. The quality is poor in the production of toilets in the Russian branch. And so, as a budget option, it’s quite acceptable.

Roca is a Spanish company that works with world-famous architects and designers. Her plumbing is even found in world buildings. This company is popular because it has in its assortment toilets for all segments of the population.

Gustavberg is a Swedish sanitary ware that is versatile and can fit into any interior. All products come with a 25 year warranty. The variety does not shine, and the quality does not justify the price. For which they were absorbed by the Villeroy & Bosh concern.

Ifo is a Swedish manufacturer that makes products from local clays from Lake Ivo. It has a long history and a century-old brand. However, some models have weak drainage. Average price on the market.

Jacob Delafon - a French company could have entered the world market as a manufacturer of high-quality sanitary ware, but when it decided to move its production to China, its reputation was shaken. But still, her products are sophistication and individuality. All tanks, without exception, are silent and have a dual-mode drain. There are models for disabled people.

Interesting: Installing a food waste disposer for your sink

AM.PM is a world leader in quality. After all, the company is a concern of three powers at once - Germany, Great Britain and Italy. The toilets combine all the needs of the buyer. To create such toilets, special “sanitary” porcelain is used. And the price from the manufacturer is appropriate.

Laufen – a special feature of this company is its special antibacterial and water-repellent substances. Therefore, the models of this company are hygienic and easy to use. In addition to hygiene, toilets represent creativity and uniqueness for each buyer.

Types of wall-hung toilet mounting systems

The choice of installation must be approached responsibly, since the bowl is fixed to it, as well as all other plumbing fittings, which include the tank, pipes and flush control device. There are 2 types of fastening systems:

1. Block installation. A simple and inexpensive design of small dimensions, the fastening of which is carried out in a niche previously made in the wall. For a block installation, all plumbing fixtures are fixed and a toilet is installed, after which the hole is closed with sheets of waterproof plasterboard, and then it is additionally sealed with other finishing.

   The key negative quality of this system is its inability to be mounted in walls and partitions that are made of thin material (wood, foam blocks, gypsum plasterboard). Block installations can only be installed on permanent floors, which significantly reduces their use.

2. Frame design. An order of magnitude more complex and expensive option, which takes the form of a steel frame (often with an anti-corrosion coating), on which the necessary installation elements are hung. The frame-type design is characterized by its enormous dimensions (width - 500-600 mm, depth - 150-300 mm, height - up to 1.40 m). This type of installation can be installed in almost any convenient place in the room. It is important to choose a suitable toilet and mounting method:

• If the installation takes place near a partition made of plasterboard or foam blocks, then the best option is a floor structure that is mounted on legs.
• For major ceilings, it is recommended to install it on the wall. In this case, the installation must be mounted on a vertical surface that is subject to the entire load.
• The combined option is that the installation of structures can be carried out not only on vertical, but also on horizontal coverings.

When choosing an installation, you should also consider the location of the toilet. If in the future the product will be installed under a window, it is recommended to give preference to a design with a shortened frame.

The following types of systems can be noted:

• Angular. In this case, the fastening is carried out at the junction of the walls at a certain angle.
• Products with a traverse that is attached to the floor surface. This design feature makes it possible to use the toilet as a bidet.

All models of wall-hung sanitary ware can be compared to consoles, since they are also capable of evenly distributing body weight. Their thoughtful design, despite the significant fragility of the products, can easily withstand loads of up to 400-500 kg.

Product quality rating

So, when the buyer knows what he will sit on, a new problem arises. How quality will the product be? And for this, you need to decide what budget your wallet will count on. After all, the rating of toilets by quality is just as important as by manufacturer.

A budget option

If you only have enough money for a budget option, then you shouldn’t even bother. After all, 80% of all plumbing supplies are available to the working class across the country. This is mainly a domestic manufacturer, whose goods are practically not subject to taxes.

And the quality is in no way inferior to Western analogues. You should also clarify that if some foreign company has a branch in our country, then it makes sense to buy a good toilet at a low price.

Another manufacturer of cheap plumbing fixtures is China. The quality of such earthenware products leaves much to be desired. But, if the question is about installing toilets in public institutions, then this is the best option.

Middle class

This plumbing is of much higher quality than China or domestic manufacturers. But it also costs an order of magnitude more. Middle-class toilets are produced in countries such as Poland, Turkey, the Czech Republic, Spain, Portugal and Italy. On average, the price threshold for such plumbing is about 2-3 times higher than the budget option, but the quality is much better.

Luxury class

It is considered an elite plumbing fixture that not everyone can afford. The countries producing expensive plumbing fixtures are Germany, Austria and Sweden. The price of toilets is 5-7 times higher than the budget option. But, in this case, you need to look at what kind of manufacturer it is. Otherwise, there is a risk that for that kind of money you can buy average quality or a budget option in the same Germany.

It will be interesting: How to permanently defeat mold in the bathroom and shower

Main selection criteria

To specifically decide which wall-hung toilet to choose, you need to consider all the key criteria that you should definitely pay attention to when purchasing.

Material

In the production of these products, the following materials are used as the main ones:

• Porcelain. Wall-hung toilets made of this material are of high quality and have an attractive appearance.

  They are characterized by a high level of strength and, with careful handling, can easily last for 50 years. The material provides the products with a smooth surface that does not accumulate odors and dirt, making them easy to maintain in proper condition without performing any special actions. One significant disadvantage of porcelain is that its cost is higher than earthenware.

• Faience. Products made from this material are in greatest demand on the market. Externally, faience wall-hung toilets resemble those made of porcelain, but they have an uneven, rough structure, which causes plaque to form in the bowl. To avoid this drawback, preference should be given to products with an additional glaze coating, which is not inferior in practicality to the previous option. Such wall-hung toilets are distinguished by their affordability, ease of maintenance and ease of use, as well as a huge number of possible colors and shapes, so that from a wide range you can choose the right model for a room with any design. With proper handling, the service life can reach up to 35 years.
• Stainless steel. Wall-hung toilets made from it have an original appearance, a long service life, and also require little maintenance, which is why they are often installed in public restrooms and in industries.
• Glass. Even due to their unusual and impressive appearance, such products are quite rarely seen in bathrooms. The reason is their significant cost, the need for regular cleaning, fragility and the ability to see waste.
• Plastic. Toilets made from this material are easy to maintain, but they are not reliable enough and are easily susceptible to mechanical damage.

  The products are most suitable for installation in country houses and country houses, which are used only in the summer.

• Polymer concrete. Wall-hung toilets made of artificial stone look original, and are also reliable and have a long service life. The disadvantages of polymer concrete products are their high cost and low resistance to acids.

The greatest demand among the presented materials are ceramic wall-hung toilets made of thin porcelain and much denser earthenware.

Dimensions

When choosing a toilet, dimensions also play an important role. According to their dimensions, products can be classified into three categories:

• Compact. The products have a length of up to 54 cm. They are ideal for small bathrooms with limited free space. These also include corner models, which provide the opportunity to make the most efficient use of space in a room with small dimensions.
• Average. These toilets have sizes ranging from 54 to 60 cm. These products are among the standard ones, which are preferred by most buyers.
• Enlarged. Such wall-hung toilets range from 60 to 70 cm. They are comfortable to use for people with disabilities, and are also preferred when there is a large amount of free space in the bathroom.

When choosing a wall-hung toilet, you must take into account the size of the room in which it will be located, as well as your own preferences. For a huge bathroom, a large product will be more suitable, and if there is too little free space, then installing a structure with small dimensions will be the best solution.

Form

Among the models from various manufacturers on the market, you can find wall-hung toilets with a variety of designs. The most practical are products that have an oval or round shape, since they have the following positive qualities:

• There are no sharp corners, due to which there is an order of magnitude lower likelihood of injury in the event of an accidental collision with the toilet.
• Products with this shape are easy to care for.

In addition to them, you can find rectangular, teardrop-shaped, rectangular and other types of construction that have a complex design.

When choosing one model or another, it is also important to take into account the style of the room. In a bathroom with a high-tech or modern style, products with a drop-shaped and streamlined shape look good. Wall-hung toilets with a standard design are more suitable for rooms with a classic interior.

Internal construction of the bowl

The inside of the bowl of a wall-hung toilet can have a different shape (visor, plate-shaped, funnel-shaped).

The latter option is the most hygienic, but at the same time it contributes to the formation of a huge amount of splashes, to avoid which you can resort to using the “anti-splash” system. The visor shape, thanks to the presence of a special shelf, is distinguished by convenience and quality of cleaning, and also protects from water drops.

It is necessary to highlight a number of the following design features of the bowl structure:

• The most convenient to use is the bowl, which has a gentle slope to the drain.
• It is not recommended that the water surface be located at the bottom, as this may cause splashing.

By taking a responsible approach to such qualities, it will be possible to eliminate possible inconveniences when using the product.

Color

White wall-hung toilets are the most popular and often they can be seen not only in bathrooms in apartments and private houses, but also in restrooms in public places. However, in addition to them, the assortment of modern manufacturers includes models of many other shades, and in some cases they are decorated with images.

Colored wall-hung toilets can attract more attention from buyers because they have an original appearance and are easy to maintain.

Structure of a toilet flush

This option can be performed in various ways:

• A direct (horizontal) flush is formed by a stream of water supplied from the rear, which, after flushing the front side of the bowl, moves into the drain. The negative quality of this design is splashing.
• Circular flushing occurs through numerous small-sized holes that are located along the perimeter of the bowl at the top. Due to the fact that they are located obliquely, water pours out of them in a spiral, forming a powerful funnel. The circular drain provides not only increased flushing quality, but also more economical consumption of liquid.

Dual flush systems also reduce the amount of water used. They have two buttons. One of them provides the ability to empty the tank completely, and the second only allows half draining, which can be instantly paused if necessary.

A rimless wall-hung toilet with a directional flush system has appeared on the market quite recently, but is already the most hygienic solution.

The most technologically advanced models are capable of touch control, which activates the device instantly after lifting the lid. The drain is also triggered automatically after a person leaves the coverage area of ​​the infrared sensor.

A suitable option, in which the cost fully corresponds to the quality, are wall-hung toilets with a circular flush.

Floor models

Ido Seven D 36214

This is a Finnish-made model, characterized by high quality workmanship. In addition to holes for mounting to the floor, it is possible to install it to the wall. The design looks very modern and attractive, thanks to which this toilet will fit organically into the interior of the bathroom, regardless of its design style. The product has a system called “anti-splash” that prevents splashes. In addition, there is a function that prevents condensation from forming on the outer walls of the toilet, so moisture will not begin to accumulate on the body.

More: TOP 10 insulation for walls - which is better?

The outlet is universal - suitable for any sewer system, because it can be installed in a horizontal or inclined position. Inside the tank there is a special compartment where you can put a special freshener tablet, which has a disinfecting and softening effect, so there will be no limescale on the surface of the toilet. The toilet is made of porcelain; the drainage system can operate in two modes. All surfaces are coated with a special antibacterial composition.

Advantages:

• Small overall dimensions;
• The seat is equipped with a microlift;
• All fittings are reliable and durable.

Flaws:

• High price.

5. Gustavberg Nordic 2310

Another imported model included in our review of the best toilets. This toilet is made in Sweden, it has a beautiful appearance, the flush button is quite convenient, and does not begin to loosen during use. The model is very comfortable, perfect for people of any size, the seat is equipped with a microlift, lowers smoothly and very quietly, in addition, this system allows you to protect the toilet from various types of damage. The drain button is double, the maximum volume of water collected in the tank is 7 liters. The water drains almost silently.

Installation does not take much time, and it is also very simple. The product comes with everything you need not only for assembly, but also for installation. The water outlet is horizontal, the toilet bowl is made of high-quality sanitary porcelain, the surface does not absorb dirt.

Advantages:

• Small overall dimensions;
• Convenient two-button flush;
• Easy to install;
• Acceptable cost of equipment.

Flaws:

• The drainage system becomes unusable over time.

Ideal Standard CONNECT

Belgian model, which is made exclusively from environmentally friendly, hypoallergenic and safe materials for human health. The design is reliable and practical, the appearance is characterized by clear shapes and streamlined lines. The toilet is perfect for installation not only at home, but also for office and public spaces. The overall dimensions are small, the toilet makes the bathroom stylish, gives it originality, and significantly saves useful space in the room. The model is equipped with a special anti-dirt coating, which keeps the product in its original form throughout the entire period of operation.

There are several design options - they differ from each other in the maximum volume of the flush tank, the material from which the seat is made, and the presence or absence of a microlift. The flush is circular and dirt will not accumulate under the rim thanks to this technology.

Advantages:

• The highest quality of workmanship and materials from which the toilet is made;
• There is an anti-splash system;
• The release is horizontal;
• Acceptable price.

Flaws:

• The surface where the toilet will be located must first be perfectly leveled.

Toilet AM.PM Inspire C508607WH

In third place in our review of the best floor-standing toilets is a product from a German manufacturer. Many users note a rather original shape with streamlined lines and a complete absence of sharp corners. This allows you to protect the model from accumulating dirt in hard-to-reach places and facilitate the cleaning process. The outlet is horizontal, the tank fits as tightly as possible to the toilet itself - during operation there will be no leaks of any kind.

The model is designed for domestic use, but it can also be installed in public places. The seat is not included in the kit; it will need to be purchased separately. Many users note another important point regarding this toilet - the manufacturer provides a fairly long warranty of as much as 25 years. The overall dimensions are not too large - the product is 37 cm wide, 66.5 cm deep, 86 cm high. The toilet does not require a significant amount of free space, so it is well suited even for a compact toilet or a combined bathroom. The water supply is carried out from the bottom of the tank, so the water pipe or flexible hose will not be visible.

More: TOP 10 best sawing machines, how to choose a tabletop circular saw

Advantages:

• Long warranty period;
• Easy to care for;
• Workmanship.

Flaws:

• High price.

Duravit D-Code

One of the most budget models presented in our review, even though this toilet is made in Germany. The quality of production, like that of most German products, is at the highest level, however, almost all owners of such toilets talk about the unique design, although at first glance it may seem that it is simply impossible to introduce something new into such classic equipment. First of all, the model is distinguished by the most reliable fittings, which do not fail during the entire service life of this equipment.

The toilet is made of durable porcelain, which, if necessary, can withstand significant physical stress, including impact. Users note the high price-quality ratio of the design. The tank has a double flush system, which allows for significant water savings. The toilet is compact, has a classic shape and small overall dimensions - well suited for small bathrooms.

Advantages:

• High level of strength;
• Acceptable dimensions;
• If necessary, you can install a seat with a microlift;
• The fittings provide a double drain.

Flaws:

• Water does not leave the bowl as quickly as it comes from the tank.

JIKA Lyra 8.2423.4

It is a very convenient and inexpensive model, which deservedly enjoys such wide popularity and has rightfully taken the leading position in our ranking of the best toilets among free-standing floor structures. The geometry of the model is excellent, there are no bevels at all, which indicates compliance with the technology of casting and subsequent drying of the product. The water outlet from the bowl is horizontal, the water seal is quite high, so the design perfectly protects the bathroom or toilet from the penetration of unpleasant odors from the sewer. The dimensions are small, so the model will fit perfectly even into a cramped room. The kit does not include a seat; it will have to be purchased separately. All shapes are rounded, the lines are smooth, there are no sharp corners. The traditional color is white. The average service life is very long - about 35-45 years.

Advantages:

• One of the most compact models in our rating;
• Reliable and durable design that can withstand significant loads;
• The design is traditional in style;
• Reasonable cost;
• Presence of antibacterial coating on all surfaces;
• Double flush system.

Flaws:

• Not detected.

Important components: cover and button

When choosing a product, you must also pay attention to the lid, which can be:

• Standard.
• Have an automatic device that ensures the lid is lifted instantly.
• Equipped with a microlift system, which facilitates smooth lowering.

This extreme functionality is useful due to the fact that it can eliminate the possibility of mechanical damage to the surface of the lid when it is closed abruptly. In addition, the lid and seat may have a special coating that provides protection against bacteria.

The flush button is also an important component. Depending on the tank drain system, it can be single or double. By giving preference to the second option, it is possible to reduce water consumption.

Since the button is the only component of the fittings that is located in a visible place, manufacturers of wall-hung toilets pay great attention to its design. These parts come in a variety of colors and shades.

The buttons are large in size because they hide the inspection window, which makes it possible to control and adjust the functioning of the shut-off valve and other components of the fittings.

Additional options and features

Wall-hung toilets can be equipped with a variety of devices, for example, an anti-splash system. In this case, the center of the drain hole is shifted by the structure, which is why splashes of water are extinguished during draining. There may be a glaze on the surface of the bowl, which repels dirt and prevents plaque and rust from forming inside it.

Some products are equipped with a number of the following functions:

• aeration;
• built-in bidet;
• blowing;
• drying;
• remote flushing via remote control;
• heating of the lid with the ability to regulate the temperature.

In addition, the latest wall-hung toilets from Japanese manufacturers have options that provide the opportunity to analyze the remains of the body’s vital activity, informing the user about the state of his health. It must be taken into account that the presence of additional functions directly affects the price of the product.

Review of the best manufacturers of wall-hung toilets

There are many different manufacturers on the market, of which several are the most popular and have proven themselves on the positive side.

Roca

A Spanish manufacturer that produces high-quality, affordable and functional wall-hung toilets mainly from earthenware.

Most of the bowls in the range, which have a round, rectangular and square shape, are made in hi-tech style. Dimensions of brand products:

• length – 35.55-86 cm;
• height – 40-76 cm;
• width – 50-70 cm.

Roca wall-hung toilets are available in different price segments. There are budget models on sale that cost 4-5 thousand rubles, as well as more expensive ones – 20 thousand or more, which have a number of additional functionality.

Vitra

Products from the Turkish company Vitra are inexpensive, but have a fairly good level of quality. Most of the brand’s model range has additional useful options, for example, an anti-splex system. All of them are made of porcelain and are equipped with standard or ultra-thin Duroplast seats with a microlift.

Vitra wall-hung toilets are manufactured in different sizes, providing the opportunity to choose the most optimal product in terms of dimensions. The company's products have a streamlined design, so even models with square and rectangular shapes have smoothed and rounded corners.

Basically, the cost of Vitra wall-hung toilets ranges from 5 to 10 thousand rubles, but you can also see more expensive options from the company on sale.

Cersanit

Polish company engaged in the production of budget sanitary ware. The company's assortment mainly includes wall-hung toilets of a semicircular shape, which are made of earthenware. The seats of the products are made of duroplast.

They do not have additional functions. Wall-hung toilets are manufactured exclusively in the most popular sizes, so you don’t have to search for products with non-standard dimensions. An ordinary model without fasteners can be purchased for about $50-60.

Laufen

The range of this Austrian company includes various wall-hung toilets: classic, teardrop-shaped, and also in the form of an inverted pyramid or duck. Sizes also come in a wide variety.

In most cases, products are made of earthenware, but they have many additional options, for example, antibacterial coating, micro-lift lid. The price of Laufen wall-hung toilets varies from 5 to 25 thousand rubles.

Jacob Delafon

The plumbing products of this French company are distinguished by a proven original design. Jacob Delafon wall-hung toilets come in a variety of shapes: square, rectangular, trapezoidal. Basically, porcelain is used as the main material, and their seats are often equipped with a microlift. The dimensions are quite varied, but the cost of the products ranges from 15 to 30 thousand rubles.

Villeroy & Boch

A German company that produces high-quality and varied wall-hung toilets. The brand's assortment includes models of small dimensions in a minimalist style, which are perfect for bathrooms with limited free space, as well as more solid products with a classic design. The cost of wall-hung toilets from Villeroy & Boch varies from 6 to more than 50 thousand rubles.

Geberit

Swiss manufacturer specializing in the expensive price segment. Its products are electronic and in addition they are equipped with many additional functions, including automatic drainage, a built-in bidet, and a water heater. The cost of the products is quite high and only occasionally can you see models priced at less than 100 thousand rubles.

In addition to the listed companies, there are other time-tested manufacturers on the market, for example, Jika, Ifo, Ideal Standart Duravit and many others.

Having understood how to choose a wall-hung toilet, no significant difficulties will arise during the selection, and the purchased product will not only decorate the bathroom, but will also last for many years if all the above selection criteria and recommendations for its use are met.

Video: